Blog

Why Do Toilets Clog?

Few things put such immediate dread as the toilet not flushing like it should. You wait for a moment, heart pounding, ‘Is this about to happen? Am I ready for it? Where’s the plunger.’ If you are lucky the flush picks up strength and you breathe a heavy sigh of relief. If you’re not you might end up with a wet floor at least. Why do toilets clog? They’re made out of non-abrasive porcelain so what’s happening to cause this jam? Read on! We’ll cover every clog causing conundrum!

Why Do Toilets Clog?

Toilets, like the sewer pipes they lead into, are made of non-abrasive materials that allow for waste water to move freely through. In a perfect world, there would never be any snags – unfortunately, the real world is far from perfect and a number of different circumstances can cause toilets to clog.

Irresponsible Flushing

We’ve talked about what not to pour down the drain before, but with all the worries about toilet paper right now (thanks COVID-19) it bears repeating: only flush toilet paper down your toilet!

THESE WILL CLOG YOUR TOILET

  • Tampons
  • Facial tissues
  • Cotton swabs
  • Condoms
  • Dental floss
  • Diapers

Any of those materials can get lodged in the pipes and create an environment for other things to get stuck on. A single cotton swab could get jammed right across the middle of the pipe and soon enough toilet paper is catching too. Even facial tissues can clog a toilet despite their seeming similarity to toilet paper, they aren’t made to break down in water in the same way. 

How to Fix:  Just don’t do it! Avoid the clog, avoid flushing anything other than toilet paper.

A Blocked Vent

It might surprise you to learn but a portion of your plumbing runs through the roof! That’s right, the plumbing vent, or vent stack, helps regulate air pressure in your plumbing system. The plumbing vent pipe removes gas and odors from the system, just like the drain pipes remove the waste water. It also allows for fresh air to get into the plumbing to help water flow more smoothly. When everything is working as it should, the vent keeps the proper pressure in the plumbing system. But what happens when it’s not working?

If the vent becomes blocked, the toilet will begin to flush slower, and that reduced speed will cause the flushes to not be drained completely. This can cause a clog to develop as not all of the waste is flushed each time.

How to Fix: Plumbing vents are located on the roof, so fixing any blockages here are best left to professionals!

Flapper Fluctuations

The flapper (find out more about toilet parts here) is the part of your toilet that releases water from the tank down the back of the bowl and creates the flush. If the flapper isn’t opening entirely, the amount of water that gets through and generates the flush may not be enough to create a strong flush. When the flush is weak, clogs are more likely to form.

How to Fix: Take a look in the toilet tank and adjust the chain connecting the flush handle to the flapper. With the chain tightened, the flapper should open up completely when the flush handle is operated.

Older Fixtures

If you have an older toilet, especially if its an old ‘low-flow’ model, the toilet may not be able to generate enough flushing power. When those low-flow models were first introduced the engineering wasn’t entirely developed leading to some lackluster performance. Now a days the designs have drastically improved allowing for a more powerful low-flow flush.

How to Fix: The only way to fix an old, poorly performing toilet is to replace it.

Sewer Struggles

It’s entirely possible that the clog isn’t in your toilet at all, but rather the sewer lines down stream. A clog later in the line or tree roots bursting through can create backup problems.

How to Fix: Hire a professional to clear out the lines. While they’re at it, get a Sewer-Oscopy!

If you are having any troubles with your plumbing at all, from a clogged toilet to a leaky water heater, Economy Plumbing Service is here to help! Give us a call and our guys will be out in no time to get your plumbing working right and give you the peace of mind.

Remember, if water flows to it or through it, we do it!

Recommended Posts

water pipe emergency repair

How to Respond Quickly When a Major Pipe Burst Occurs

A major pipe burst can flood your Tucson, AZ home in minutes. Stay calm, act fast, and call an emergency plumber once you've stopped the flow. How to Deal With a Major Pipe Burst, Fast Protect Your Family If you've got small children or pets nearby, get them out of the affected area right away. Either the water itself or an electrical issue could endanger them, and they won't know how to stay out of your way or keep themselves safe. Shut Off the Water Head straight to your home's main shutoff valve: don't worry about assessing the damage or grabbing any belongings yet. Turn the valve clockwise until it stops. In most homes this valve is in the basement near the water heater, by the front foundation wall, or where the main line enters from the street. Turn Off the Electricity If the burst is near any outlets, lights, or appliances, turn off power to those areas at your breaker box. Only do this if you can reach the panel safely without stepping in deep water. If it feels risky, leave it alone and wait for help. Drain Remaining Water from the Pipes With the main water supply off, open all the cold-water faucets in the house and flush the toilets once. This relieves pressure and empties the lines so there's less water to keep spraying from the burst spot. Leave the faucets open until the flow slows to a drip. Document Everything Before Cleanup Get photos and videos of the damage right after you've stopped the water. You'll want evidence of the burst pipe, your wet floors, any affected walls and furniture, and damage to any belongings. You will need this for your insurance claim later, and the insurance companies will need proof that the damage came from this burst pipe rather than something else. Move Belongings and Contain the Water Lift rugs and move electronics, furniture, and important papers out of the wet zone. If the water is spreading, roll up towels or use plastic sheeting to block doorways and keep it from reaching other rooms. Work fast but safely. Don't carry heavy, soaked items if they're too heavy for you, and focus on irreplaceable items first, like photos, electronics, and documents. Call a Tucson, AZ Emergency Plumber Don't wait if water is involved, because every minute you lose is another minute for mold to grow or a new problem to develop.  A good emergency plumber can isolate the problem, make a temporary repair if it's after hours, and plan for a permanent fix as soon as possible while coordinating with a restoration team. Start Removing Standing Water While you wait for the plumber, use mops, towels, a wet/dry vacuum, or buckets to get water off the floor. The faster you remove it, the less it soaks into subfloors or walls. Open the windows and run fans to improve airflow if the weather allows. Your aim is getting the area as dry as possible. You've got this. Act fast, and call us at Economy Plumbing Service, LLC at 520-885-3510 for the best emergency plumbing service in Tucson.

Tankless or Traditional: What’s the Best Water Heater Option for Your Home?

The decision between tankless and traditional models for replacement water heaters in Tucson can make a real difference in your daily comfort and long-term costs. Let's take a closer look at how each type works, which will help you pick the right fit for your household. Traditional Heaters Traditional tank-style water heaters store a set amount of water, usually 40 to 80 gallons, in an insulated tank and keep it hot constantly using either gas or electricity. When you turn on the faucet, hot water flows from the tank while cold water refills it at the bottom. Tankless Heaters These heaters only give you hot water when you need it. Cold water passes through a heat exchanger inside the compact unit, and out comes hot water, nearly instantly. Pros of Both Let's consider the pros of the traditional heaters first: They're cheaper up front Installation is simpler because most homes already have the connections in place When it needs replacing, it's simple and often same-day They can handle a high flow rate (lots of usage simultaneously) The pros list for the tankless heater is also enticing: Less wasted energy from water being heated when it's not needed No running out of water, no matter how many people take showers Longer tank lifespan Takes up less space Cons of Both Here's the downsides to be aware of with traditional heaters: They use more energy (much more, in some cases) They run out of hot water, and you have to wait while they refill They're bulky and need more room for placement They need to be replaced sooner than tankless As for tankless heaters, be aware that: Installation costs are usually higher Initial purchase price is higher Flow rate is lower unless you invest in a bigger (or multiple) units Scale can form inside the heat exchanger faster than in a tank model Best Water Heaters in Tucson: Local Factors There are a few local factors that might also influence your decision. We have hard water, so that means scaling is more of an issue. Both types of heaters need to be flushed to prevent buildup, but the tankless might need it more often. We've also already got high energy bills with the hot summers we have here, so trimming that with a tankless model can make a big difference over time. Tankless water heaters pay for themselves in energy savings in about seven years, and if you take care of your model, it can last up to 20.If you're still weighing the options for your specific setup, give us a call at Economy Plumbing Service LLC here in Tucson at 520-885-3510. We're a family-owned business with more than seventeen years of honest, no-pressure service here in Tucson. We'll walk through your usage, space, and water conditions to help you choose the heater that actually fits your home and lifestyle. We also serve clients in Vail, Rita Ranch, Oro Valley, Green Valley, and surrounding areas.

Gas line repair and inspection in Pima County, AZ.

Are Your Gas Lines in Safe? Warning Signs You Can’t Ignore

We rely on our gas lines in Tucson to heat our homes, give us instant hot water, power our stoves, and more. Keeping your gas line safe is a serious responsibility, because the dangers of a problem in the gas line can be deadly. Here's some warning signs to look out for. Warning Signs That Gas Lines in Tucson Are in Trouble Emergency Signs Some warning signs are emergencies, and you cannot ignore them. Call your gas provider or emergency services and leave the area immediately if: You smell a sulfurous odor in or immediately around your house People in the house are suddenly and inexplicably experiencing headaches, dizziness, nausea, or shortness of breath If gas is escaping into the house, it can cause you and your family serious physical harm. The gas, as you breathe it, begins to displace the oxygen in your blood. You gradually asphyxiate or suffocate if you are exposed to too much for too long. Non-Emergency There are other warning signs that are less immediately serious, but you need to pay attention to them, regardless, as they could quickly turn serious: Corrosion Always inspect your pipes regularly, and if you see rust or other corrosion on them, be sure to call a qualified contractor right away. There may also be an issue if you notice flaking or bubbling of paint near your gas lines or a lot of dampness and residue around the fittings. A professional can seal joints and even replace a bad section of pipe if needed. Hissing If you hear hissing near a gas appliance or a meter, it likely means that gas is escaping. Even a little bit of a leak can increase your bills, of course, and indoors, it can create a very dangerous condition. Contact a professional contractor right away to take a look. If it's a single appliance, turn off the gas to that appliance. Bigger Bills If your habits haven't really changed, but the cost of your gas bill keeps going up, try turning off all your gas appliances and writing down the meter reading. Then, wait for an hour or two and check the meter again. If it has gone up, you have a leak. Low Pressure If the flame on your stove or in your furnace doesn't have the power it should have, then you could have a leak somewhere in the line leading to that appliance, or there could be a blockage. There also could be a faulty regulator in the appliance itself or corrosion in the piping. If several appliances seem to be affected, then the issue could be farther down the line and could be either your responsibility or something that your utility company needs to deal with. A contractor can investigate the situation and help you figure out what's going on. If you're noticing any issues with your gas line, schedule an appointment with us at Economy Plumbing Service LLC in Tucson or call us 24/7 at 520-885-3510. We also serve Vail, Rita Ranch, Oro Valley, and Green Valley.