Blog

The Most Common Reasons Your Toilet Won’t Flush

A toilet that won’t flush is a common, yet distressing situation. If your toilet won’t flush, there can be a lot of causes with simple solutions. Toilets not flushing is one of the homeowners’ most common plumbing issues.

Please continue reading to learn why your toilet won’t flush and how to fix it with home remedies. 

Your Toilet Is Clogged

The number one reason why toilets won’t flush is that they are clogged with material. Even if you’re the only person who uses your toilet, it still gets a lot of use, and it will eventually clog. It would help if you always kept a plunger in your bathroom so that you can solve this problem every time it arises immediately.

Fortunately, you can solve most of your toilet clogging problems by using a plunger to dislodge the material until you can flush it. Try not to flush the toilet until you’re positive you’ve dislodged the blockage; otherwise, you can flood your bathroom. However, more serious clogs that are deeper in your plumbing system could require professional intervention instead of a home remedy.

There’s Something Wrong with Your Toilet’s Lift Chain

Another reason your toilet won’t flush could be because something is wrong with the lift chain inside the tank. Toilets flush by pushing down on the handle, which engages the rubber float valve to rise inside the tank. The chain pulls the valve up, and this causes water to flush out the waste in your bowl. If your chain is broken, flushing won’t work. The immediate solution to this problem is to open up your toilet tank and lift the chain manually. This will flush your toilet until you permanently fix the chain.  

If you notice your lift chain is broken inside the tank, you can buy a replacement online or at a hardware shop. Older toilets could experience lift chain breakage after several uses. 

Your Toilet Tank Doesn’t Have Enough Water.

You need enough water in your toilet tank if you want to flush it properly. If insufficient water in your toilet tank floods your bowl when you flush, your toilet won’t do its job properly. The immediate solution is to manually add enough water to your tank so that you can flush right away until you’ve solved the problem permanently.

If your toilet tank doesn’t get enough water, you may have a cracked toilet bowl, your sewer line vent might be blocked, or your fill valve could be damaged. Check all these areas within your toilet tank to see which issue is causing your problem and fix whatever is damaged.

Your Toilet’s Drainpipes Aren’t Optimal.

Unfortunately, you can’t fix all toilet issues at home on your own.  For example, if your toilet drainpipes aren’t optimal for your drainage needs, you’ll frequently experience plumbing backups, or your toilet won’t flush. Also, if your toilet stream pipes aren’t formed right, you’ll have to call a plumber to diagnose and resolve this problem. 

Attempting to rearrange your toilet drainpipes on your own could cause severe plumbing damage that could cost you tons of money. Damaging your pipes could also void a home warranty if yours covers plumbing. 

Your Toilet’s Rim Holes are Clogged

Your toilet won’t flush if the rim holes are clogged with debris or calcium. If your house uses hard water, you might have a calcium buildup where your ramjets are placed. Fortunately, it’s easy to dissolve calcium in your toilet bowl with everyday home cleaning supplies.

You first need to ensure no bleach cleaner is in your toilet bowl because it will negatively interact with other chemicals and cause dangerous gas. Then, you can put distilled white vinegar in a spray bottle and spray the bottom of the realm of your toilet where your jets are with the vinegar. White vinegar is a natural dissolvent for calcium buildup. 

After you let the vinegar sit on The Jets for at least 20 minutes, you can use your toilet as you normally would. If calcium buildup is the problem, this method should resolve the issue. . 

Call a Trustworthy Plumber

If you try all these methods and your toilet still won’t flush, there might be something more severe wrong with your plumbing system. Contact us at (520) 214-2149 today, and we’ll look at your clogged toilet and help you fix the problem so you can get back to  regular life. Clogged toilets are unpleasant, so let us handle the mess. 

Recommended Posts

water pipe emergency repair

How to Respond Quickly When a Major Pipe Burst Occurs

A major pipe burst can flood your Tucson, AZ home in minutes. Stay calm, act fast, and call an emergency plumber once you've stopped the flow. How to Deal With a Major Pipe Burst, Fast Protect Your Family If you've got small children or pets nearby, get them out of the affected area right away. Either the water itself or an electrical issue could endanger them, and they won't know how to stay out of your way or keep themselves safe. Shut Off the Water Head straight to your home's main shutoff valve: don't worry about assessing the damage or grabbing any belongings yet. Turn the valve clockwise until it stops. In most homes this valve is in the basement near the water heater, by the front foundation wall, or where the main line enters from the street. Turn Off the Electricity If the burst is near any outlets, lights, or appliances, turn off power to those areas at your breaker box. Only do this if you can reach the panel safely without stepping in deep water. If it feels risky, leave it alone and wait for help. Drain Remaining Water from the Pipes With the main water supply off, open all the cold-water faucets in the house and flush the toilets once. This relieves pressure and empties the lines so there's less water to keep spraying from the burst spot. Leave the faucets open until the flow slows to a drip. Document Everything Before Cleanup Get photos and videos of the damage right after you've stopped the water. You'll want evidence of the burst pipe, your wet floors, any affected walls and furniture, and damage to any belongings. You will need this for your insurance claim later, and the insurance companies will need proof that the damage came from this burst pipe rather than something else. Move Belongings and Contain the Water Lift rugs and move electronics, furniture, and important papers out of the wet zone. If the water is spreading, roll up towels or use plastic sheeting to block doorways and keep it from reaching other rooms. Work fast but safely. Don't carry heavy, soaked items if they're too heavy for you, and focus on irreplaceable items first, like photos, electronics, and documents. Call a Tucson, AZ Emergency Plumber Don't wait if water is involved, because every minute you lose is another minute for mold to grow or a new problem to develop.  A good emergency plumber can isolate the problem, make a temporary repair if it's after hours, and plan for a permanent fix as soon as possible while coordinating with a restoration team. Start Removing Standing Water While you wait for the plumber, use mops, towels, a wet/dry vacuum, or buckets to get water off the floor. The faster you remove it, the less it soaks into subfloors or walls. Open the windows and run fans to improve airflow if the weather allows. Your aim is getting the area as dry as possible. You've got this. Act fast, and call us at Economy Plumbing Service, LLC at 520-885-3510 for the best emergency plumbing service in Tucson.

Tankless or Traditional: What’s the Best Water Heater Option for Your Home?

The decision between tankless and traditional models for replacement water heaters in Tucson can make a real difference in your daily comfort and long-term costs. Let's take a closer look at how each type works, which will help you pick the right fit for your household. Traditional Heaters Traditional tank-style water heaters store a set amount of water, usually 40 to 80 gallons, in an insulated tank and keep it hot constantly using either gas or electricity. When you turn on the faucet, hot water flows from the tank while cold water refills it at the bottom. Tankless Heaters These heaters only give you hot water when you need it. Cold water passes through a heat exchanger inside the compact unit, and out comes hot water, nearly instantly. Pros of Both Let's consider the pros of the traditional heaters first: They're cheaper up front Installation is simpler because most homes already have the connections in place When it needs replacing, it's simple and often same-day They can handle a high flow rate (lots of usage simultaneously) The pros list for the tankless heater is also enticing: Less wasted energy from water being heated when it's not needed No running out of water, no matter how many people take showers Longer tank lifespan Takes up less space Cons of Both Here's the downsides to be aware of with traditional heaters: They use more energy (much more, in some cases) They run out of hot water, and you have to wait while they refill They're bulky and need more room for placement They need to be replaced sooner than tankless As for tankless heaters, be aware that: Installation costs are usually higher Initial purchase price is higher Flow rate is lower unless you invest in a bigger (or multiple) units Scale can form inside the heat exchanger faster than in a tank model Best Water Heaters in Tucson: Local Factors There are a few local factors that might also influence your decision. We have hard water, so that means scaling is more of an issue. Both types of heaters need to be flushed to prevent buildup, but the tankless might need it more often. We've also already got high energy bills with the hot summers we have here, so trimming that with a tankless model can make a big difference over time. Tankless water heaters pay for themselves in energy savings in about seven years, and if you take care of your model, it can last up to 20.If you're still weighing the options for your specific setup, give us a call at Economy Plumbing Service LLC here in Tucson at 520-885-3510. We're a family-owned business with more than seventeen years of honest, no-pressure service here in Tucson. We'll walk through your usage, space, and water conditions to help you choose the heater that actually fits your home and lifestyle. We also serve clients in Vail, Rita Ranch, Oro Valley, Green Valley, and surrounding areas.

Gas line repair and inspection in Pima County, AZ.

Are Your Gas Lines in Safe? Warning Signs You Can’t Ignore

We rely on our gas lines in Tucson to heat our homes, give us instant hot water, power our stoves, and more. Keeping your gas line safe is a serious responsibility, because the dangers of a problem in the gas line can be deadly. Here's some warning signs to look out for. Warning Signs That Gas Lines in Tucson Are in Trouble Emergency Signs Some warning signs are emergencies, and you cannot ignore them. Call your gas provider or emergency services and leave the area immediately if: You smell a sulfurous odor in or immediately around your house People in the house are suddenly and inexplicably experiencing headaches, dizziness, nausea, or shortness of breath If gas is escaping into the house, it can cause you and your family serious physical harm. The gas, as you breathe it, begins to displace the oxygen in your blood. You gradually asphyxiate or suffocate if you are exposed to too much for too long. Non-Emergency There are other warning signs that are less immediately serious, but you need to pay attention to them, regardless, as they could quickly turn serious: Corrosion Always inspect your pipes regularly, and if you see rust or other corrosion on them, be sure to call a qualified contractor right away. There may also be an issue if you notice flaking or bubbling of paint near your gas lines or a lot of dampness and residue around the fittings. A professional can seal joints and even replace a bad section of pipe if needed. Hissing If you hear hissing near a gas appliance or a meter, it likely means that gas is escaping. Even a little bit of a leak can increase your bills, of course, and indoors, it can create a very dangerous condition. Contact a professional contractor right away to take a look. If it's a single appliance, turn off the gas to that appliance. Bigger Bills If your habits haven't really changed, but the cost of your gas bill keeps going up, try turning off all your gas appliances and writing down the meter reading. Then, wait for an hour or two and check the meter again. If it has gone up, you have a leak. Low Pressure If the flame on your stove or in your furnace doesn't have the power it should have, then you could have a leak somewhere in the line leading to that appliance, or there could be a blockage. There also could be a faulty regulator in the appliance itself or corrosion in the piping. If several appliances seem to be affected, then the issue could be farther down the line and could be either your responsibility or something that your utility company needs to deal with. A contractor can investigate the situation and help you figure out what's going on. If you're noticing any issues with your gas line, schedule an appointment with us at Economy Plumbing Service LLC in Tucson or call us 24/7 at 520-885-3510. We also serve Vail, Rita Ranch, Oro Valley, and Green Valley.