Blog

How to Keep Your Pipes From Freezing

Welcome back to another entry here at the Economy Plumbing Services blog! Winter is well and truly here! We may have thought that last month but these past few weeks is when the temperatures really started to dip, and just in time! The winter holidays are just around the corner. If you’re planning on going on any trips this winter, perhaps to a family cabin, you might want to take some steps to keep your pipes from freezing!

How to Keep Your Pipes from Freezing with a Few Easy Tips

Insulate Pipes

The number one thing you can to do keep your pipes from freezing this winter is to insulate those bad boys!

Despite what you might think at first, pipe insulation is relatively inexpensive – especially if you compare it to the repairs costs of a burst pipe! Keep a particularly close eye on spaces where pipes are in unheated and interior spaces of your home. Places like the attic, garage, basement are all places where the pipes are exposed to ambient temperature. 

Most pipe insulation is made up of fiberglass, foam, polyethylene. If you’re expecting a cold front to blow in and you don’t have anything on hand, you can even use newspaper and duct tape if you’re in a fix. But, regardless, insulating your pipes is a huge first step to keep your pipes from freezing!

Keep Garage Doors Closed

For many homeowners, their plumbing runs through the garage in a number of ways and the water heater might be there as well. This is unfortunate because the garage is kind of perfectly built to let things get cooold. Garages have lots of smooth concrete that keeps the place cold. If you keep the door open and let the cold air in well you’re just turbocharging those freezing conditions. 

Open Doors & Cabinets

While we’re on the subject of keeping doors closed, there’s also power in keeping things open inside.  Here’s why! Keeping interior doors open, helps your home regulate and keep a consistent temperature. Now as for cabinets…

Pipes are often exposed in your bathroom and kitchens, well ok not exposed, but they’re outside of the walls in these locations, usually tucked into a cabinet. These cabinets, if left closed can trap cold air in them, and keep your pipes cold.

By going about your home and opening doors and cabinets you keep the warm air circulating around and warming the plumbing. 

Leave Faucet Running

This might surprise you, but if you leave a faucet dripping, ever so slightly, just a drip you’ll help prevent your pipes from freezing over. Here’s why. 

Running water, even just a tiny amount, has more energy than standing water, this energy, this friction created by the movement of water produces the tiniest amount of heat, making the water harder to freeze over. So by allowing a faucet to drip, especially one that is fed through exterior or exposed pipes, you’re opening up a pipe for water to flow through.

The other benefit? Opening a faucet releases pressure from building up in the cold pipes. This will keep the pipe from bursting as the combination of pressure and solidifying water overwhelms the space. 

Thermostat Consistency

Just like the thought process behind opening doors & cabinets, keeping your thermostat at a consistent temperature will help keep your pipes from freezing over and potentially bursting. If you’re using your heater during the day, don’t turn it off at night in an attempt to save energy as you could risk the temperature dropping drastically and the water in your pipes responding.

Seal Cracks and Openings

Really, this should go up there next to insulating pipes as one of the best things you can do to keep your pipes from freezing over and bursting! Look around your home for any holes, gaps, cracks, or openings that can allow cold air to find its way into your home and walls. Look for cracks around windows and doors, look at the holes that utility wires for cables run through. Look at the places where your plumbing comes out of exterior walls. If there any cracks at all, caulk them up to keep warm air in, and cold air out. This helps your home’s insulation in a big way!

These are just some of the ways you can prevent your home’s pipes from freezing over.  For us here in Tucson we are pretty fortunate that the temperatures don’t dip that deep too often so usually following these precautions are more than enough to ensure our plumbing stays in tip-top shape. If you’re worried about the state of your pipes heading into the winter, give Economy Plumbing a call! We’ll do a plumbing inspection that will sort you right out!

Recommended Posts

water pipe emergency repair

How to Respond Quickly When a Major Pipe Burst Occurs

A major pipe burst can flood your Tucson, AZ home in minutes. Stay calm, act fast, and call an emergency plumber once you've stopped the flow. How to Deal With a Major Pipe Burst, Fast Protect Your Family If you've got small children or pets nearby, get them out of the affected area right away. Either the water itself or an electrical issue could endanger them, and they won't know how to stay out of your way or keep themselves safe. Shut Off the Water Head straight to your home's main shutoff valve: don't worry about assessing the damage or grabbing any belongings yet. Turn the valve clockwise until it stops. In most homes this valve is in the basement near the water heater, by the front foundation wall, or where the main line enters from the street. Turn Off the Electricity If the burst is near any outlets, lights, or appliances, turn off power to those areas at your breaker box. Only do this if you can reach the panel safely without stepping in deep water. If it feels risky, leave it alone and wait for help. Drain Remaining Water from the Pipes With the main water supply off, open all the cold-water faucets in the house and flush the toilets once. This relieves pressure and empties the lines so there's less water to keep spraying from the burst spot. Leave the faucets open until the flow slows to a drip. Document Everything Before Cleanup Get photos and videos of the damage right after you've stopped the water. You'll want evidence of the burst pipe, your wet floors, any affected walls and furniture, and damage to any belongings. You will need this for your insurance claim later, and the insurance companies will need proof that the damage came from this burst pipe rather than something else. Move Belongings and Contain the Water Lift rugs and move electronics, furniture, and important papers out of the wet zone. If the water is spreading, roll up towels or use plastic sheeting to block doorways and keep it from reaching other rooms. Work fast but safely. Don't carry heavy, soaked items if they're too heavy for you, and focus on irreplaceable items first, like photos, electronics, and documents. Call a Tucson, AZ Emergency Plumber Don't wait if water is involved, because every minute you lose is another minute for mold to grow or a new problem to develop.  A good emergency plumber can isolate the problem, make a temporary repair if it's after hours, and plan for a permanent fix as soon as possible while coordinating with a restoration team. Start Removing Standing Water While you wait for the plumber, use mops, towels, a wet/dry vacuum, or buckets to get water off the floor. The faster you remove it, the less it soaks into subfloors or walls. Open the windows and run fans to improve airflow if the weather allows. Your aim is getting the area as dry as possible. You've got this. Act fast, and call us at Economy Plumbing Service, LLC at 520-885-3510 for the best emergency plumbing service in Tucson.

Tankless or Traditional: What’s the Best Water Heater Option for Your Home?

The decision between tankless and traditional models for replacement water heaters in Tucson can make a real difference in your daily comfort and long-term costs. Let's take a closer look at how each type works, which will help you pick the right fit for your household. Traditional Heaters Traditional tank-style water heaters store a set amount of water, usually 40 to 80 gallons, in an insulated tank and keep it hot constantly using either gas or electricity. When you turn on the faucet, hot water flows from the tank while cold water refills it at the bottom. Tankless Heaters These heaters only give you hot water when you need it. Cold water passes through a heat exchanger inside the compact unit, and out comes hot water, nearly instantly. Pros of Both Let's consider the pros of the traditional heaters first: They're cheaper up front Installation is simpler because most homes already have the connections in place When it needs replacing, it's simple and often same-day They can handle a high flow rate (lots of usage simultaneously) The pros list for the tankless heater is also enticing: Less wasted energy from water being heated when it's not needed No running out of water, no matter how many people take showers Longer tank lifespan Takes up less space Cons of Both Here's the downsides to be aware of with traditional heaters: They use more energy (much more, in some cases) They run out of hot water, and you have to wait while they refill They're bulky and need more room for placement They need to be replaced sooner than tankless As for tankless heaters, be aware that: Installation costs are usually higher Initial purchase price is higher Flow rate is lower unless you invest in a bigger (or multiple) units Scale can form inside the heat exchanger faster than in a tank model Best Water Heaters in Tucson: Local Factors There are a few local factors that might also influence your decision. We have hard water, so that means scaling is more of an issue. Both types of heaters need to be flushed to prevent buildup, but the tankless might need it more often. We've also already got high energy bills with the hot summers we have here, so trimming that with a tankless model can make a big difference over time. Tankless water heaters pay for themselves in energy savings in about seven years, and if you take care of your model, it can last up to 20.If you're still weighing the options for your specific setup, give us a call at Economy Plumbing Service LLC here in Tucson at 520-885-3510. We're a family-owned business with more than seventeen years of honest, no-pressure service here in Tucson. We'll walk through your usage, space, and water conditions to help you choose the heater that actually fits your home and lifestyle. We also serve clients in Vail, Rita Ranch, Oro Valley, Green Valley, and surrounding areas.

Gas line repair and inspection in Pima County, AZ.

Are Your Gas Lines in Safe? Warning Signs You Can’t Ignore

We rely on our gas lines in Tucson to heat our homes, give us instant hot water, power our stoves, and more. Keeping your gas line safe is a serious responsibility, because the dangers of a problem in the gas line can be deadly. Here's some warning signs to look out for. Warning Signs That Gas Lines in Tucson Are in Trouble Emergency Signs Some warning signs are emergencies, and you cannot ignore them. Call your gas provider or emergency services and leave the area immediately if: You smell a sulfurous odor in or immediately around your house People in the house are suddenly and inexplicably experiencing headaches, dizziness, nausea, or shortness of breath If gas is escaping into the house, it can cause you and your family serious physical harm. The gas, as you breathe it, begins to displace the oxygen in your blood. You gradually asphyxiate or suffocate if you are exposed to too much for too long. Non-Emergency There are other warning signs that are less immediately serious, but you need to pay attention to them, regardless, as they could quickly turn serious: Corrosion Always inspect your pipes regularly, and if you see rust or other corrosion on them, be sure to call a qualified contractor right away. There may also be an issue if you notice flaking or bubbling of paint near your gas lines or a lot of dampness and residue around the fittings. A professional can seal joints and even replace a bad section of pipe if needed. Hissing If you hear hissing near a gas appliance or a meter, it likely means that gas is escaping. Even a little bit of a leak can increase your bills, of course, and indoors, it can create a very dangerous condition. Contact a professional contractor right away to take a look. If it's a single appliance, turn off the gas to that appliance. Bigger Bills If your habits haven't really changed, but the cost of your gas bill keeps going up, try turning off all your gas appliances and writing down the meter reading. Then, wait for an hour or two and check the meter again. If it has gone up, you have a leak. Low Pressure If the flame on your stove or in your furnace doesn't have the power it should have, then you could have a leak somewhere in the line leading to that appliance, or there could be a blockage. There also could be a faulty regulator in the appliance itself or corrosion in the piping. If several appliances seem to be affected, then the issue could be farther down the line and could be either your responsibility or something that your utility company needs to deal with. A contractor can investigate the situation and help you figure out what's going on. If you're noticing any issues with your gas line, schedule an appointment with us at Economy Plumbing Service LLC in Tucson or call us 24/7 at 520-885-3510. We also serve Vail, Rita Ranch, Oro Valley, and Green Valley.